If you’re in the market for a new HVAC system, it might be hard to navigate all the confusing terminology and acronyms to find out which system is right for you. Most homeowners are concerned about energy efficiency as they want to keep their monthly energy bills low. However, it can be hard to understand energy efficiency ratings if you don’t know the terminology or how these ratings are determined. In this post, we’ll talk more about how HVAC energy efficiency is measured and what you should look for when buying a new HVAC system. What is SEER and EER? SEER indicates the electrical input that is required to run your air conditioner over an average cooling season as compared to how much cooling the system generates. This rating is based on an average temperature of 82 degrees Fahrenheit. EER is tested based on higher operating temperatures of about 95 degrees Fahrenheit or higher. EER […]
What Is An Air Handler?
An Air Handler is a vital part of any split system HVAC system. Also known as an Air Handling Unit, (AHC) an Air Handler is the device within an HVAC or heat pump air conditioning system that “handles” the air that is brought in through the intake to be prepared for either heating or cooling. It prepares the air, by either removing or adding heat, depending on the season and the system in use. It actually changes the air that is being brought in. The Air Handler then circulates the air through the HVAC system for disbursement through the space to be heated or cooled. Smaller units are called “coils” and are used in split systems, those that act as both an air conditioning and heating system. In larger systems, typically known as MAUs, for makeup air unit, the system actually does not handle re-circulated air. All air is brought in from the outside. These […]
- << previous
- 1
- …
- 4
- 5
- 6
